Back to Home
WashLabs
Learn 4 min read

Post-Construction Window Cleaning: Office Case Study

Steel sunshades on every floor blocked poles, ropes and lifts at a new Columbus, Ohio office. Two of us cleaned four stories of glass by drone in two hours.

By Sean Stone, Co-Founder, WashLabsUpdated November 2, 2026

On October 23, 2026 we cleaned the windows at 515 E Main St in Columbus, Ohio, a new four-story office building. Construction dust covered the glass, and a steel sunshade on every floor blocked the usual ways to reach it. Two of us cleaned the glass by drone in about two hours, with no lift.

Key Takeaways

  • Building: 515 E Main St, Columbus, Ohio. Four stories of glass, newly built
  • Date: Friday, October 23, 2026
  • Problem: post-construction dust on every window, and a steel sunshade over the glass on every floor
  • Method: drone rinse, top floor first
  • Crew and time: two people, about two hours for the glass. A building like this usually takes a crew of about eight in a boom lift.

The building

515 E Main St is a new four-story office building in Columbus. Every floor has a steel sunshade that sticks out over the glass. Construction around the site was still going on when we arrived, and the windows had the dust that the last trades leave behind.

We had cleaned a glass office building in Columbus three weeks earlier. That job led to this call, eight hours from home.

Why poles, ropes and lifts were a bad fit

Water-fed poles work well up to about four or five stories, but here the pole hits the steel sunshade before it reaches the glass. A rope crew coming down from the roof runs into a sunshade on every floor. A boom lift can get around them, but it takes a bigger crew, a rental, and solid ground beside a building that was still a construction site.

Lifts cause their own damage, too. A boom lift that reaches the fourth floor weighs several tons, and its tires and outriggers can rut a lawn and crack pavers. Some buildings leave no place to put one at all: planters, steps, overhangs, or a narrow strip between the wall and the street keep the lift too far from the glass.

The drone tucks in under each sunshade, sprays the glass, and moves on to the next one. It needs no lift space, so the grass and the new sidewalks were never at risk.

Yellow cleaning drone spraying top-floor windows just under a steel sunshade on a Columbus, Ohio office building
The drone under a steel sunshade, spraying the top floor. 515 E Main St, Columbus, Ohio.

See also: High-rise window cleaning methods compared

How the day went

We started at the top floor and rinsed each section all the way down, so dirty water does not run over glass that is already clean. Construction dust gets harder to remove the longer it sits, so a new building is worth cleaning soon after the last trade leaves.

The day had three parts. In the morning, two of us cleaned the four stories of glass in about two hours. In the afternoon we went to Middle West Spirits, a distillery in Columbus, and cleaned the copper roof on its tower. At sunset we came back to 515 E Main St and washed the brick side of the building.

Drone washing the upper brick and glass facade of a Main Street office building in Columbus, OH
The brick side, washed by drone at sunset the same day.

See also: The copper roof case study

What a drone can and cannot do on new glass

A drone rinses. It does not scrape. Dust and the film that construction leaves on glass come off with the rinse. Paint overspray and hardened sealant on the glass still need hand work with a blade, and we point those out at the walkthrough.

If your building has sunshades, fins, or ledges over the glass, ask every company quoting the job how they will reach the glass underneath them.

See also: Commercial window washing · Building facade washing

Frequently Asked Questions

Ready to see what drone cleaning costs?

Free estimate in under 30 seconds.