To prepare a pool deck for opening, start two to three weeks before the first swim. Walk the deck, clear off the furniture and planters, test the drains, and check the coping for loose stones. Take the winter cover off, then clean the deck with a method set by its surface. Let it dry, finish any sand or sealer work, and only then do the final water balance and bring the furniture back.
Key Takeaways
- Start two to three weeks before opening day, so repairs and drying time fit
- Clear everything off the deck, planters too, and clean furniture on the lawn or driveway
- Test every deck drain with a bucket of water and note the spots that puddle
- Rock each coping stone with your foot: a loose one is a repair before opening
- Cover off first, deck cleaning next, final chemical balance after
Start Two to Three Weeks Before Opening Day
Most of the work in opening week is the pool: the cover, the water level, the filter, and the chemicals. The deck around it is where people walk barefoot and wet, and it has had all winter to grow algae in the shade.
Give yourself two to three weeks. That leaves time to fix a loose coping stone, to re-sand pavers, and for a sealer to dry if your deck needs one. It also leaves room for a rain day.
This page is the homeowner's side of opening week: what to do, and in what order. For how we clean the deck itself, see our pool deck cleaning service page.
See also: Pool deck cleaning
Step 1: Clear the Deck
Take everything off the deck: chairs, tables, loungers, umbrella bases, planters, toys, and the hose reel. A crew cannot clean under a planter, and the ring it leaves is often a rust or algae stain. Tell the crew where those rings are.
Clean the furniture on the lawn or the driveway before the deck is cleaned. If you clean it on the deck afterward, the dirty water runs across the surface you just paid to clean.
Cushions and umbrellas usually come out of storage with mildew. Open each umbrella all the way and look at the fabric and the folds. Let cushions dry fully in the sun before they go back on the chairs, or the mildew comes back.
Step 2: Test the Drains and Find the Low Spots
Deck drains and slot drains fill with grit, leaves, and old sunscreen over a winter. Lift the grates you can reach and pull out what you can by hand. Then flush each drain with a hose.
Pour a bucket of water near each drain and watch it. It should run toward the drain and away from the pool. If the water sits, the drain is still blocked, or the deck has settled.
Walk the deck after a rain and note every spot that holds water. Those are the spots where algae comes back first and where people slip. Point them out to the crew, so those spots get extra time and get checked again after the rinse.
Step 3: Check the Coping
The coping is the cap around the edge of the pool. Walk the full edge and press each coping stone with your foot. A stone that moves or rocks is a repair for your pool builder or a mason. Fix it before anyone uses the pool. Cleaning does not fix it.
Look at the joint between the coping and the deck. If it is open or cracked, water gets under the deck there. That is also a repair item, and it is easier to see on a clean deck.
Look for a white, chalky line on the coping and the tile at the water line. That is mineral scale from splash-out. It needs different chemistry from the algae on the deck, so tell the crew it is there.
Step 4: Cover Off, Then Clean the Deck
Take the winter cover off before the deck is cleaned. Pulling a cover across a clean deck drags leaves and black water over it. Clean and fold the cover on the lawn or the driveway, not on the deck.
Then clean the deck. The surface decides the method. Pressure always starts low and goes up to medium only if the surface takes it. High pressure is a last resort, because it can be destructive, and on a pool deck it is rarely needed.
Broom-finish concrete: takes a pressure wash well. A surface cleaner keeps the spray under a hood and cleans evenly.
Stamped or sealed concrete: low pressure only. High pressure lifts the sealer and leaves the color blotchy. If the sealer is already failing, cleaning makes that easy to see.
Pavers: they clean well, but some joint sand washes out. Plan to re-sand once the deck is dry.
Travertine: a soft, calcium-based stone. Low pressure, and no strong acid, which etches the stone along with the scale.
Bluestone and flagstone: porous stone that needs careful rinsing so it does not dry with a haze.
Wood and composite decking: low pressure. Too much pressure tears wood fibers and scars composite boards.
See also: Pool deck cleaning · Prepare Brick Pavers for Re-Sanding or Sealing · Clean a Bluestone Patio Without Haze · Clean Composite Decking Without Scarring
Step 5: Put the Pool Chemicals Away on Cleaning Day
Keep shock, chlorine tablets, and acid closed and stored away from the deck while it is cleaned. Chlorine products and acids give off a toxic gas when they mix, so they should never share a bucket, a spill, or a puddle.
Keep kids and pets off the deck until it has been rinsed and the crew says it is clear.
If you have a pool service, tell them the cleaning date. It helps them plan the opening around it.
Step 6: Dry, Finish, Then Balance the Water
Book the deck cleaning before the final chemical balance. The crew covers the skimmers and sends the rinse water away from the pool, but some overspray on the coping is normal. It is dilute, and the opening balance takes care of it. Test the water afterward, as you would anyway.
Let the deck dry before any sand or sealer work. Pavers get new joint sand once they are dry. If the deck is due for sealer, follow the drying time on the product label, since sealer on a damp surface can turn cloudy.
Then raise the water, start the equipment, balance the chemicals, and bring the furniture back.
Book the Deck Cleaning
Before we pack up, we walk the deck with you. We check the shaded corners, the steps, and the low spots you pointed out, and anything still slick gets treated again.
We clean pool decks across Philadelphia and the Main Line and quote within 24 hours. Send a few photos of the deck, the coping, and the shaded side, or call (610) 981-2285.
See also: Request a quote · Patio and walkway washing
