Most green or black stains on stucco are algae and mildew on the surface, and a soft wash removes them. The pattern tells you more than the color. An even film across a shaded wall is growth from shade and damp air. A narrow band under one point of the gutter, a dark strip along the bottom of the wall, or stains that spread from the corners of a window point to water getting into or behind the stucco. Rust streaks and white powder are not growth at all. Fix those causes before you clean.
Key Takeaways
- Read where the stain is before you read its color
- An even green film on a north or shaded wall is surface growth. A soft wash removes it
- Stains below window corners, along the bottom of the wall, or under one gutter point are water stories
- White powder (efflorescence) and rust from inside the wall mean water is moving through the stucco
- A stain that stays dark days after rain, or comes back weeks after a wash, needs a stucco contractor before a cleaning crew
Start with where the stain is
Before you think about cleaning, stand back from the wall and look at the shape of the stain. Water always follows a path, and the shape of the stain shows you that path.
An even film across most of one wall. This is almost always growth that comes from shade and damp air. It is heaviest on the north wall and on walls under trees, and lighter or absent on the sunny side of the same house.
A narrow band that starts at one point on the roof edge and runs straight down. Water spills from the gutter there, or from a seam or a clogged outlet, and keeps that strip of wall wet.
A dark strip along the bottom one or two feet of the wall. Rain splashes mud and water back up from the soil and mulch. If the stucco runs down into the soil or the mulch is piled against it, the bottom of the wall also soaks up ground water.
Stains that spread out from the lower corners of a window, or from below a sill. Water is getting in around the window and coming back out through the stucco below it.
A stain at the spot where a lower roof meets a wall. That joint needs a piece of flashing (often called a kick-out) to turn roof water away from the wall. When it is missing, the wall below stays wet.
Small patches with no clear source, darker after dry weather than after rain. That is water held inside the wall.
What each color usually means
Green. Algae. It needs light and moisture, so it grows on the surface of damp walls. It is the most common stain on stucco in this area, and it cleans off.
Black. Usually mildew or mold, sometimes mixed with algae. It grows in the same damp, shaded places as green, often under the eaves. Black streaks that hang below window sills can also be plain dirt washed off the sill.
Orange or brown streaks. Rust. If the streaks start at a sprinkler head's spray line or at a metal fixture, the iron comes from the water or the fixture. If rust bleeds out from inside the stucco, at the bottom edge of the wall or along a corner, the metal lath or trim behind the finish is rusting. Metal only rusts there when it stays wet.
White powder or crust. Efflorescence. Water moving through the stucco carries salts out, and they dry on the face of the wall. It brushes off when dry and comes back as long as the water keeps moving. A growth cleaner does nothing to it.
Dark gray or brown blotches with soft edges, like tide marks. Water staining. The wall is wet from behind or from a leak above.
A quick test: does the stain lighten?
Mix a little household bleach with water. In a corner nobody sees, dab it on the stain with a cotton swab and wait a minute or two.
If the stain lightens, it is algae or mildew. A soft wash removes it.
If nothing changes, it is not growth. It can be dirt, rust, efflorescence or water staining. A wash alone will not fix it, and you should find the source first.
Also press the stucco near the stain with your thumb, and tap it with your knuckle. Traditional stucco is hard and sounds solid. A soft spot, a bulge, or a section that sounds different from the wall around it is a warning sign. On EIFS (synthetic stucco), the wall sounds hollow everywhere because of the foam board behind the finish, so compare it with the wall nearby.
Signs of a moisture problem behind the stucco
Call a stucco contractor before you book a wash if you see any of these:
Cracks with darker stucco along their edges.
Stains spreading from the lower corners of windows or doors.
Rust or white crust bleeding out of the wall.
Soft, crumbly or bulging stucco.
A stain that is still dark several dry days after rain, or that came back within weeks of a cleaning.
Damp spots, stains or a musty smell on the inside of the same wall.
Water behind stucco is a known problem on many houses in southeastern Pennsylvania. A stucco contractor can test the wall for moisture, often by drilling small probe holes that are sealed after the test. If the wall is wet inside, it needs repair first. A wash on that wall puts more water on it and hides the warning sign for a few weeks.
When it is only growth: how it gets cleaned
If the stain is an even film of algae or mildew and the stucco is sound, it cleans well. We soft wash the wall: a cleaning solution at low pressure kills the growth, stays on for a few minutes, and a low-pressure rinse carries it off from the top down. We never use high pressure on stucco or EIFS. It etches the finish and forces water into the wall.
Our guide to soft washing stucco, EIFS and vinyl siding covers the method step by step.
See also: Soft washing stucco, EIFS and vinyl siding · Soft washing
Match the fix to the pattern
Cleaning removes the stain. The pattern tells you what to change so it does not come back so soon.
Even film on a shaded wall: trim the trees and shrubs that keep it in shade, and plan to clean that wall more often than the rest.
Band under one gutter point: clear the gutter, check the seam and the slope, and make sure the downspout carries water away from the wall.
Dark strip at the bottom: pull the mulch back so it does not touch the stucco, turn the sprinkler heads away from the wall, and check that the ground slopes away from the house.
Stains under windows, at roof-to-wall joints, rust or white crust: these are repairs. Get the wall checked and fixed, then clean it.
After every wash, we walk the house with you to confirm it is clean, and we point out any stains that did not change. Those are the ones to show a contractor.
Text a photo of the stain to (610) 981-2285. We tell you if it looks like growth or something else, and reply with a quote within 24 hours.
See also: Request a quote
